elektronische bauelemente S3KBP20-C ~ s3kbp80-c voltage 200v ~ 800v 3.0 amp glass passivited bridge rectifiers 17-apr-2013 rev. b page 1 of 2 http://www.secosgmbh.com/ any changes of specification will not be informed individually. rohs compliant product features ? ideal for printed circuit board ? low forward voltage drop, high current capability ? reliable low cost construction utilizing molded plastic technique results in inexpensive product ? these are halogen & pb free components ? this series is ul recognized under component index, file number e255340 maximum ratings and electrical characteristics (rating 25 c ambient temperature unless otherwise specified. sing le phase half wave, 60hz, resistive or inductive load. for capacitive load, de-rate current by 20%.) part number parameter symbol S3KBP20-C s3kbp40-c s3kbp60-c s3kbp80-c unit maximum recurrent peak reverse voltage v rrm 200 400 600 800 v tc=140 c (with heatsink) 3 t a =25c (without heatsink) 2 average rectified output current @50h z sine wave, r-load t c =92c (without heatsink) i o 2 a peak forward surge current @ 50h z sine wave, 1 cycle, t a =25c i fsm 80 a maximum peak forward voltage 2 v fm 1.05 v peak reverse current 1 i rrm 10 a i 2 t rating for fusing @1ms t 8.3ms, t j =25c,rating of per diode i 2 t 34 a 2 s typical thermal resistance (with heat sink) r jc 1.5 c/w typical thermal resistance(without heat sink) r ja 45 c/w typical thermal resistance(without heat sink) r jl 8 c/w operating and storage temperature range t j ,t stg 150, -40~150 c notes 1. v rm =v rrm , pulse measurement, rating of per diode. 2. i fm =1.5a, pulse measurement, rating of per diode kbp millimete r millimete r ref. min. max. ref. min. max. a 14.30 14.70 g 3.40 3.60 b 10.80 11.20 h 3.70 3.90 c 1.35 1.75 i 0.90 1.10 d 14.00 15.00 j 2.10 2.30 e 1.30 1.70 k 0.40 0.60 f 0.60 0.80
elektronische bauelemente S3KBP20-C ~ s3kbp80-c voltage 200v ~ 800v 3.0 amp glass passivited bridge rectifiers 17-apr-2013 rev. b page 2 of 2 http://www.secosgmbh.com/ any changes of specification will not be informed individually. ratings and characteristic curves
|
